company news about The track scale of Baowu Group Zhongnan Co., Ltd. successfully passed the "national inspection"

Recently, four track scales in Lianzhong Group's factory have successfully passed the national certification, with the highest level of accuracy of 0.5 level for dynamic track scales in China.
There are 4 levels of accuracy in track scales, namely 0.2 level, 0.5 level, 1 level and 2 level, and most of the dynamic track scales used in China are 1 level, and there are only a few dynamic track scales with 0.5 level. 0.5 level qualified requirement is the error in the range of ±2.5‰, and the stable data is very high for the dynamic track scales, and the accurate and stable weight data should be obtained in the state of motion, which requires the track scales to have enough straightness and levelness to allow the passing of the track scales. To obtain accurate and stable weight data in the state of motion, the track balance is required to have sufficient straightness and levelness, so that the weighing of the carcase into the weighing area is smooth and without fluctuations, in order to minimize the impact of the transverse and longitudinal forces on gravity when crossing the balance. At the same time, it is also very important to do the usual maintenance work, in order to ensure that the vehicle smoothly into the weighing platform, you need to often on the verticality of the sensor, the spacing between the two rails, rail height, such as measurement, adjustment.
Dynamic track balance successfully passed the national certification and can meet the requirements of 0.5 level qualified, is Lianzhong equipment department, Shaogang engineering, logistics department and other units work together. In order to ensure the successful completion of the 4 sets of track balance verification in one day, the logistics department is constantly in command and scheduling, arranging personnel to work overtime, with the "National Inspection" personnel, equipment management department, Shaogang engineering and other units to all track balance overtime to complete the verification. 4 sets of dynamic track balance can be achieved in 26 consecutive years of 0.5 level qualified is the result of the joint efforts of all measurement people. Measurement of the results of the joint efforts of people.