|
Product Details:
|
| Name: | DX51-Z20-Z275 Hot Dipped Galvanized Steel Coil | Length: | As Customer's Requirements |
|---|---|---|---|
| Thickness: | 0.12-6mm | Surface: | Galvanized Coated Skinpass |
| Grade: | DX51D,SGCC,etc | Application: | Construction |
| Standard: | ASTM, AiSi, ASTM, Bs, DIN, GB, JIS | Type: | Steel Coil, Hot-Galvanized Steel Sheet |
| High Light: | Hot Dipped Galvanized Steel Coil,dx51d z150 galvanized steel coil,Galvanized Steel Coil 0.12mm |
||
DX51-Z20-Z275 Hot Dipped Galvanized Steel Coil 0.12-6mm Thickness Building Roofing Sheet Safety Fence Applications
Description:
What is Galvalume Steel? Galvalume steel is carbon steel coated with an alloy that combines the impervious properties of aluminum with the malleability and galvanic protection of zinc. The alloy coating gives galvalume steel coil and sheets a smooth, plain finish.
|
Product Name
|
G550 Z275g Hot dipped galvanized steel coil and strip
|
|
Material
|
SGCC/SGCD/CGCC/TDC51DZM/DX53D |
|
Zinc Coating
|
Z40-275
|
|
Coil weight
|
4-5tons
|
|
Coil id
|
508/610mm
|
|
Package
|
Standard Sea Worthy Package
|
|
MOQ
|
25tons
|
|
Spangle
|
Normal Spangle,Mini Spangle,Big Spangle
|
|
Certificate
|
SGS,ISO
|
|
Application
|
Building, Roofing sheet, Safety Fence And So On. |
| Chemical Composition | ||||||
| GRADE | C | Si | Mn | P | S | Ti |
| SGCC/DX51D+Z | ≤0.10 | ≤0.50 | ≤0.60 | ≤0.10 | ≤0.030 | ≤0.020 |
| DX52D+Z | ≤0.10 | ≤0.50 | ≤0.60 | ≤0.10 | ≤0.030 | ≤0.020 |
| SGCD/DX53D+Z | ≤0.10 | ≤0.30 | ≤0.50 | ≤0.05 | ≤0.030 | ≤0.020 |
| SGCE/DX54D+Z | ≤0.10 | ≤0.30 | ≤0.30 | ≤0.03 | ≤0.020 | ≤0.020 |
| DX56D+Z | ≤0.10 | ≤0.30 | ≤0.30 | ≤0.03 | ≤0.020 | ≤0.020 |
| Structural | ≤0.20 | ≤0.60 | ≤1.70 | ≤0.10 | ≤0.045 | |
Product Details:
Surface Details
Workshop Details
Galvanizing steel production line with annual output of 200000 tons, which adopts the mo
st advanced American GBNB and Germany's Siemens electrical control systems. it can produce ZERO
zinc spangle, small-zinc spangle and common zinc spangle etc.Thickness from 0.125 mm to 4.5mm,
and width from 500 mm to 1250 mm, and zinc coating from 40 - 275 g/m2,surface passivation and oil
-coating can be performed. In addition, the company introduces a slitting machine, which can meet
the customers' different requirements on the width. And Two roll-formed machines , which can produce
wave roofing sheet and Trapezoidal corrugated sheet.
Our service
1.Cut large coils into small coils.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport;
because for container shipping, each container usually loads weight can not be over 26 tons, but
each large coil is usually about 28 tons, so one large coils has to be cut into small coils,
and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner,
each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually
demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
2.Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open
flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading
by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to
cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into
steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.
Our certification
FAQ:
Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept the third party inspection absolutely.
Contact Person: Jessie
Tel: +8613327919758
